We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422702875
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 200 mm |
Sealing material | Polyurethane |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422702875, communicate with FAMAGA, the world's primary retailer of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of goods and individual attention to each customer. We cherish everyone, who conspired with us - thus, our regular clients accept the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Yemen, Afghanistan, Montenegro, Algeria, Zimbabwe, Malawi, Palestine, Canada, Papua New Guinea, Kuwait, Senegal, Luxembourg, Dominica, Chile, Singapore, Uganda, Gambia, Iceland, Saudi Arabia, Tonga, Turkmenistan, Namibia, Moldova, Jordan, Togo, Azerbaijan, Denmark, Poland, Bosnia and Herzegovina, Equatorial Guinea, Ukraine, Mexico, New Zealand, Hungary, Indonesia, India, Macedonia, Kyrgyzstan, Nigeria, Swaziland, Brazil, Niger, Iran, Zambia. A advanced logistics chains and a partnership network allow us to deliver our elements anywhere in the planet as soon as possible without undermining product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or place an order, contact us or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |