We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011192
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant II, with 5/2-directional valve |
Version | 2x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412011192, get in touch with FAMAGA, the world's primary vendor of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and private attention to each purchaser. We respect everyone, who conspired with us - so, our regular buyers procure the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Turkey, Kazakhstan, Indonesia, Haiti, Sierra Leone, Eritrea, Slovenia, Guinea, Palestine, Iran, Yemen, Iceland, Uganda, Belarus, Grenada, Syria, The Bahamas, Serbia, Netherlands, Qatar, Nicaragua, Benin, Ireland, The Gambia, Macedonia, South Sudan, Panama, Kyrgyzstan, Gambia, Costa Rica, Togo, Austria, Suriname, Burkina Faso, Bulgaria, Cape Verde, Djibouti, Mozambique, Luxembourg, Thailand, Guatemala, Egypt, Nepal, Finland. A well-elaborated logistics network and a partnership network guide us to ship our items anywhere in the planet quickly without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as to stay on the top.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |