We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5728410410
Description
Actuating control | double solenoid |
Switching principle | 4/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803, form C |
Protection class | IP65 |
Port size | EN 175301-803, form C |
Type | Plug |
Nominal flow Qn | 200 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 12 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5728410410, communicate with FAMAGA, the world's key company of factory-made equipment. Our company has operated for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and private attention to each consumer. We cherish everyone, who worked with us - thus, our regular purchasers bring in the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Cambodia, Tajikistan, Guinea-Bissau, Saudi Arabia, Colombia, Jordan, Angola, Guinea, Lebanon, Seychelles, Grenada, Gambia, Uruguay, Malaysia, Nicaragua, Norway, Libya, Denmark, Mali, Ukraine, Senegal, Thailand, Iceland, Belarus, Kiribati, Argentina, East Timor, Vietnam, Chile, Zimbabwe, Philippines, Central African Republic, Belize, Rwanda, Hungary, Sudan, Czech Republic, Malta, Iran, Australia, Andorra, Kazakhstan. A well-built logistics bond and a partnership network let us to ship our products anywhere in the earth with no delay without compromising product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To ask a question or make a request, contact us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 1,8 ... 10 bar |
Note | The maximum operating pressure depends on the ambient temperature. The following values are applicable:-15 °C ... 50 °C: Operating pressure 1.8 bar ... 8 bar possible.-15 °C ... 40 °C: Operating pressure 1.8 bar ... 10 bar possible. |
Control pressure min./max. | 1,8 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 200 l/min |
Connector standard | EN 175301-803, form C |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 12 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Versions with voltage of less than 50 V DC do not have a protective ground. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |