We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727475302
Description
Return type | With air spring return |
Switching principle | 5/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene,Polyarylamide |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 1100 l/min |
Compressed air connection input | Ø 10x1 |
Compressed air connection output | Ø 10x1 |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5727475302, get in touch with FAMAGA, the world's dominant distributor of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each buyer. We admire everyone, who conspired with us - hence, our regular customers pick up the most flexible purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such buyers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Ukraine, Albania, Tanzania, Cuba, Israel, Kuwait, Haiti, Slovakia, Malta, Austria, Peru, East Timor, Canada, Andorra, Singapore, Croatia, Guyana, Benin, Jamaica, Armenia, The Gambia, Samoa, Montenegro, Comoros, Antigua and Barbuda, El Salvador, Guatemala, Botswana, Uganda, Jordan, South Sudan, South Korea, Burkina Faso, Costa Rica, Mexico, Brunei, Panama, Syria, Mauritius, Djibouti, Morocco. A well-elaborated logistics chains and a partnership network assist us to send our products anywhere in the world with no delay without damaging product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -25 ... 50 °C |
Medium temperature min./max. | -25 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1100 l/min |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 17 ms |
Typ. switch-off time | 26 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Polyoxymethylene Polyarylamide |
Seals | Acrylonitrile butadiene rubber |