We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680410
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480680410, catch up with FAMAGA, the world's major producer of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each customer. We understand everyone, who cooperated with us - therefore, our regular purchasers procure the most convenient purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, India, Pakistan, Ukraine, Slovenia, Czech Republic, Suriname, Dominican Republic, Israel, Andorra, Montenegro, Samoa, Haiti, Romania, Tanzania, Netherlands, Cyprus, South Sudan, Guatemala, Malaysia, Mongolia, Philippines, Benin, Turkey, Latvia, Malta, Georgia, Belarus, Ireland, Equatorial Guinea, Cameroon, Angola, Seychelles, Mozambique, Tajikistan, Madagascar, Kuwait, Switzerland, Costa Rica, Zimbabwe, Estonia, Dominica. A well-built logistics system and a partnership network let us to ship our units anywhere in the world with no delay without damaging product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |