We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412021850
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Stroke | 125 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412021850, call FAMAGA, the world's the best provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each customer. We understand everyone, who collaborated with us - thus, our regular purchasers get the most favorable purchase conditions and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Nigeria, Benin, Kiribati, Honduras, Paraguay, Dominica, Bahamas, Kyrgyzstan, Eswatini, Senegal, Botswana, Tajikistan, Netherlands, Kenya, Monaco, United Arab Emirates, Mauritania, Cyprus, Zambia, Malaysia, Ireland, Iran, Indonesia, Tonga, Philippines, South Korea, Egypt, Iraq, North Korea, Georgia, Mexico, Comoros, El Salvador, Brunei, Morocco, Togo, Zimbabwe, Jordan, Serbia, East Timor. A advanced logistics link and a partnership network allow us to dispatch our goods anywhere in the globe immediately without compromising product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or order, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Based on ISO 6432 |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Plastic |