We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020663
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020663, catch up with FAMAGA, the world's major retailer of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each consumer. We appreciate everyone, who liased with us - therefore, our regular consumers receive the most desirable purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Brunei, Uganda, Latvia, South Africa, Azerbaijan, Chad, Fiji, Tonga, Palestine, Myanmar, Poland, Bhutan, Gambia, Central African Republic, Cyprus, El Salvador, Comoros, Kyrgyzstan, Iraq, Eritrea, Israel, Nepal, Chile, Sudan, North Korea, Antigua and Barbuda, Belarus, Niger, Guyana, Algeria, Nigeria, Tanzania, Mauritania, India, Moldova, Tunisia, Georgia, Mali, Panama, Macedonia, Austria, Greece, Benin, Turkey, Albania. A well-shaped logistics bond and a partnership network allow us to send our units anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To ask a question or place an order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |