We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R404063245
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R404063245, reach FAMAGA, the world's major vendor of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each orderer. We respect everyone, who joined with us - so, our regular purchasers bring in the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Côte d\'Ivoire, Palestine, Zimbabwe, Sri Lanka, Liberia, Oman, Ukraine, France, Bolivia, Lithuania, Belize, Ecuador, Dominica, Eswatini, Chad, Pakistan, China, Mauritius, Romania, Malawi, Uganda, Tunisia, Malaysia, Uruguay, Turkmenistan, Australia, Georgia, Uzbekistan, Zambia, Nigeria, Morocco, Thailand, Vietnam, Andorra, Rwanda, Argentina, Nepal, Hungary, Senegal, Iceland, Luxembourg, Ghana, Botswana, Slovakia, Algeria, Kazakhstan, Indonesia, Cameroon, Comoros. A well-developed logistics network and a partnership network let us to conduct our products anywhere in the world promptly without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |