We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727400092
Description
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Polyoxymethylene |
Type | O-rings for connections 1, 3, and 5 (R = 5: Exhaust, P = 1: Pressure, S = 3: Exhaust) |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5727400092, contact FAMAGA, the world's primary company of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are portrayed in the quality of products and private attention to each orderer. We esteem everyone, who conspired with us - so, our regular purchasers accept the most helpful purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Saudi Arabia, Luxembourg, Moldova, Estonia, Grenada, Greece, Austria, Rwanda, Kuwait, France, Uzbekistan, Slovenia, Brazil, Dominica, Bhutan, Philippines, Ukraine, Comoros, Iran, Australia, Zambia, Kazakhstan, Gambia, South Sudan, Sierra Leone, India, Nepal, Thailand, Switzerland, Eswatini, Libya, Slovakia, Syria, Paraguay, Argentina, United States, Central African Republic, Mozambique, Montenegro, Panama, Sudan, Zimbabwe, Iceland, Mauritius. A well-developed logistics system and a partnership network allow us to dispatch our units anywhere in the planet as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | 0 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Polyoxymethylene |
Seal | Acrylonitrile butadiene rubber |