We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680408
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480680408, make contact with FAMAGA, the world's major producer of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each customer. We praise everyone, who cooperated with us - thus, our regular customers procure the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such clients, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Malawi, Burundi, Chad, Angola, Togo, Saudi Arabia, Montenegro, Dominica, Belgium, Laos, Greece, Oman, Iran, Tonga, Tunisia, Brazil, Tajikistan, Grenada, Mozambique, Algeria, Norway, Uzbekistan, Vietnam, Ecuador, Lithuania, Nepal, Bolivia, Ukraine, Thailand, Turkey, Tanzania, North Korea, Guatemala, Chile, Eswatini, Switzerland, Libya, Pakistan, Hungary, The Gambia, Australia, East Timor, Armenia, Mauritius. A advanced logistics system and a partnership network allow us to deliver our goods anywhere in the globe as soon as possible without compromising product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |