We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020746
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Stroke | 250 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412020746, make contact with FAMAGA, the world's prime supplier of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each orderer. We understand everyone, who cooperated with us - thus, our regular buyers get the most convenient purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Guyana, Croatia, Fiji, North Korea, Iceland, Nicaragua, Nepal, Iraq, Romania, Benin, Guatemala, Colombia, Liberia, Syria, Switzerland, Cyprus, South Korea, Netherlands, The Bahamas, Ghana, Eritrea, Cape Verde, El Salvador, India, Jamaica, Ireland, Bangladesh, Nigeria, Luxembourg, Dominica, Sweden, China, Vietnam, Rwanda, Seychelles, Djibouti, Armenia, Indonesia, Niger, Comoros, Tonga, East Timor, Bosnia and Herzegovina, Finland, Georgia. A well-built logistics network and a partnership network guide us to send our units anywhere in the globe with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or make a request, contact us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Polyamide fiber-glass reinforced |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |