We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007197
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412007197, reach FAMAGA, the world's main producer of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each buyer. We esteem everyone, who worked with us - hence, our regular buyers obtain the most favorable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, El Salvador, United Arab Emirates, The Gambia, Tanzania, Greece, Angola, Syria, Bahamas, The Bahamas, Colombia, Mauritania, South Korea, Romania, Azerbaijan, Zimbabwe, Cape Verde, Bolivia, Mexico, Nicaragua, Russia, Thailand, Guyana, Albania, Philippines, Laos, Cyprus, Burkina Faso, Sierra Leone, Lithuania, Samoa, Haiti, Costa Rica, Peru, China, Austria, Madagascar, Serbia, Zambia, Nepal, Rwanda, Indonesia, Norway, Tajikistan, Croatia, United States, Qatar. A well-built logistics chains and a partnership network help us to deliver our goods anywhere in the globe immediately without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To request or order, get in touch with us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |