We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007176
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412007176, connect FAMAGA, the world's dominant vendor of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each buyer. We esteem everyone, who joined with us - so, our regular customers procure the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such clients, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Norway, Tunisia, Spain, Switzerland, Botswana, Antigua and Barbuda, Sudan, Palestine, Turkmenistan, Burma, Hungary, Kyrgyzstan, Saudi Arabia, Russia, Bosnia and Herzegovina, Nigeria, Macedonia, Kazakhstan, Azerbaijan, Burundi, Nepal, Liechtenstein, Grenada, Lithuania, North Korea, Finland, Eswatini, Rwanda, Liberia, Pakistan, Mali, Sierra Leone, Iraq, Zambia, Armenia, Latvia, Bulgaria, Laos, Samoa, New Zealand, Mozambique, Senegal, Bolivia, Jordan, Tonga, Brazil, Denmark. A well-elaborated logistics chains and a partnership network cheer us to conduct our goods anywhere in the world immediately without disreputing product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |