We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392909
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822392909, communicate with FAMAGA, the world's principle company of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each orderer. We appreciate everyone, who engaged with us - so, our regular customers pick up the most desirable purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4500 such buyers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, France, Laos, Kenya, Lebanon, Albania, Poland, Norway, Burma, Papua New Guinea, Malta, Turkmenistan, Montenegro, Singapore, Malawi, Turkey, Burundi, Cyprus, Liberia, Moldova, Greece, The Bahamas, Uruguay, Tonga, Eswatini, Zimbabwe, North Korea, Ecuador, Hungary, Kiribati, Belarus, Iceland, Senegal, Jordan, South Korea, Rwanda, Georgia, Antigua and Barbuda, Chile, Argentina, Sweden, Bangladesh, Slovakia, Burkina Faso, Bosnia and Herzegovina, Swaziland, Sudan, Finland, Tanzania, India, Paraguay, Nigeria. A well-developed logistics network and a partnership network assist us to deliver our units anywhere in the globe quickly without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |