We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5728455680
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 4/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803, form C |
Protection class | IP65 |
Port size | EN 175301-803, form C |
Type | Plug |
Nominal flow Qn | 200 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5728455680, connect FAMAGA, the world's foremost retailer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each buyer. We respect everyone, who liased with us - so, our regular clients get the most desirable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 3500 such customers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Qatar, Benin, Sudan, Guatemala, Belgium, Fiji, Bhutan, Bahamas, Slovenia, Guyana, Jamaica, Singapore, Greece, Laos, Haiti, Japan, Morocco, North Korea, Belize, South Korea, Kazakhstan, Estonia, Finland, Australia, Indonesia, Tonga, Afghanistan, Austria, Liechtenstein, Nepal, Angola, Latvia, Brunei, Panama, Zimbabwe, Malaysia, Poland, Samoa, Niger, Syria, Hungary. A well-developed logistics chains and a partnership network let us to deliver our products anywhere in the world on-time without disreputing product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or order, phone us or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 1,8 ... 10 bar |
Note | The maximum operating pressure depends on the ambient temperature. The following values are applicable:-15 °C ... 50 °C: Operating pressure 1.8 bar ... 8 bar possible.-15 °C ... 40 °C: Operating pressure 1.8 bar ... 10 bar possible. |
Control pressure min./max. | See table |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 200 l/min |
Connector standard | EN 175301-803, form C |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 12 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Versions with voltage of less than 50 V DC do not have a protective ground. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |