We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680407
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480680407, communicate with FAMAGA, the world's influential supplier of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each purchaser. We appreciate everyone, who liased with us - therefore, our regular purchasers get the most favorable purchase conditions and discounts on the industrial equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Bahrain, China, Cuba, Poland, Colombia, Bahamas, Comoros, Liberia, Croatia, Liechtenstein, Eritrea, Japan, Switzerland, Fiji, Hungary, Niger, Netherlands, Angola, Zimbabwe, Macedonia, Uzbekistan, Andorra, Indonesia, New Zealand, Benin, Mauritania, Iraq, Dominica, Kiribati, Morocco, Australia, Malta, Haiti, Panama, Suriname, Syria, Estonia, North Korea, Djibouti, Brunei, Belarus, Paraguay, Jamaica, Ghana. A well-built logistics link and a partnership network guide us to ship our items anywhere in the world quickly without damaging product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |