We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637960
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480637960, get in touch with FAMAGA, the world's primary producer of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each buyer. We esteem everyone, who worked with us - hence, our regular buyers procure the most favorable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Cape Verde, Bahamas, Mozambique, Honduras, Papua New Guinea, Mexico, Gambia, Malaysia, Azerbaijan, Netherlands, Monaco, Bolivia, South Sudan, Israel, Slovakia, Japan, The Gambia, Tajikistan, Kiribati, Turkmenistan, Denmark, Brunei, Uruguay, United States, Belarus, Sierra Leone, Syria, India, Suriname, New Zealand, North Korea, Zimbabwe, United Arab Emirates, Sweden, East Timor, Luxembourg, Tonga, China, Yemen, Burkina Faso, Austria, Philippines, Montenegro. A well-shaped logistics chains and a partnership network help us to dispatch our products anywhere in the globe as soon as possible without undermining product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or make a request, get in touch with us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |