We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010836
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Stroke | 40 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822010836, contact FAMAGA, the world's top company of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each orderer. We admire everyone, who cooperated with us - therefore, our regular purchasers accept the most beneficial purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Turkey, Malawi, Philippines, Zambia, Serbia, Czech Republic, Uganda, Palestine, Liechtenstein, Kyrgyzstan, Papua New Guinea, Lebanon, Ghana, Azerbaijan, Malaysia, Chad, Austria, Bhutan, South Sudan, Gambia, Macedonia, Andorra, Bulgaria, Uruguay, Swaziland, Israel, Japan, Iceland, East Timor, Samoa, Greece, Kenya, Antigua and Barbuda, Estonia, Bosnia and Herzegovina, Jordan, Moldova, Namibia, Costa Rica, Senegal, Central African Republic, India, Equatorial Guinea. A well-built logistics network and a partnership network allow us to ship our units anywhere in the earth promptly without disreputing product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |