We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627316
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480627316, contact FAMAGA, the world's dominant distributor of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and individual attention to each consumer. We appreciate everyone, who worked with us - so, our regular clients procure the most favorable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Congo, Bhutan, Botswana, Bulgaria, Latvia, Sierra Leone, Japan, Cameroon, Iraq, Jamaica, North Korea, Honduras, United States, Kenya, Burma, Tunisia, Macedonia, Kyrgyzstan, Brazil, Uzbekistan, The Gambia, Ecuador, Equatorial Guinea, Bolivia, Kazakhstan, Tanzania, Yemen, Turkey, Switzerland, Denmark, Israel, Lithuania, Mexico, Nigeria, Zambia, New Zealand, Iran, Armenia, Tonga, Togo, Libya, Luxembourg. A well-developed logistics link and a partnership network guide us to deliver our units anywhere in the earth immediately without undermining product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To request or book, contact us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |