We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392603
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822392603, communicate with FAMAGA, the world's major provider of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and particular attention to each customer. We praise everyone, who collaborated with us - hence, our regular consumers get the most convenient purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, San Marino, The Bahamas, Japan, Eswatini, Namibia, Georgia, Comoros, Switzerland, Libya, Afghanistan, Iceland, Honduras, Kuwait, Serbia, Tonga, Seychelles, Turkmenistan, El Salvador, Morocco, Russia, Liberia, Ireland, Kyrgyzstan, Belarus, Peru, Iran, Andorra, Cyprus, Yemen, Djibouti, Thailand, Indonesia, Malta, Zimbabwe, Vietnam, Syria, Haiti, Finland, Norway, Albania, Dominica, Latvia, Australia, Togo, Bangladesh. A well-built logistics chains and a partnership network help us to dispatch our goods anywhere in the world with no delay without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or make a request, contact us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |