G9/100V_01 AirCom Pneumatic

G50/G100
Description:
The filter separates oil, water and solid impurities from compressed air or non-corrosive gases.
It is resistant to mineral and synthetic oils.

Filter_element:
Fabric of borosilicate fibre A 901 with high-volume fiberglass bed. Coalescing effect based on
Brownian motion. With stainless steel jacket and internal draining layer. An arrow indicates flow
from inside to outside.

Filtration_efficiency: 99.99% based on 3 Μm particle size, Δp= 0.02/0.07 bar*, see special options for further filters

Service_life:
Large filter volume through folding makes for exceptionally long service life and high capacity for
collection of solid particles with low differential pressure.

Filter_change: The filter must be changed as from 0.35 bar differential pressure or after one year at the latest.
Drain: manual drain as standard
Operating_pressure: max. 50 bar or 100 bar
Temperature_range:
1 °C to 80 °C / 34 °F to 176 °F at coalescing filter, up to 100 °C / 212 °F short-term
1 °C to 40 °C / 34 °F to 104 °F at activated carbon filter

Body:
chromated and powder-coated cast aluminium at all 50 bar devices and at 100 bar devices
of sizes G1/4 to G1/2 , powder-coated steel at 100 bar devices of sizes G3/4 to G2
Elastomer: NBR/Buna-N

***************************************************************************************

G250/G350
Description:
The filter separates oil, water and solid impurities from compressed air or non-corrosive gases.
It is resistant to mineral and synthetic oils.

Filter_element:
Fabric of borosilicate fibre A 901 with high-volume fiberglass bed. Coalescing effect based on
Brownian motion. With stainless steel jacket and internal draining layer. An arrow indicates flow
from inside to outside.

Filtration_efficiency: 99.99% based on 3 Μm particle size, Δp= 0.02/0.07 bar*, see special options for further filters

Service_life:
Large filter volume through folding makes for exceptionally long service life and high capacity for
collection of solid particles with low differential pressure.
Filter change The filter must be changed as from 0.35 bar differential pressure or after one year at the latest.

Drain: manual drain as standard
Operating_pressure: max. 250 bar or 350 bar
Temperature_range:
1 °C to 80 °C / 34 °F to 176 °F at coalescing filter, up to 100 °C / 212 °F short-term
1 °C to 40 °C / 34 °F to 104 °F at activated carbon filter

Body:
chromated and powder-coated cast aluminium at sizes G1/4 to G1/2,
powder-coated steel at sizes G3/4 to G2

Elastomer: NBR/Buna-N